Have you ever needed to power a 12-volt relay in a circuit but only had 6 or 9 volts available? This simple circuit will solve that problem. It allows 12-volt relays to be operated from 6 or 9 volts, ...

The Machine Primary Control Elements (MPCE) 1 and 2 are typically a relay with force guided contacts. When a safety interlock, light curtain, or e-stop switch opens a circuit, the MPCE NO contacts ...

Relays usually are driven using optocouplers, which offer isolation between analog and digital grounds to ensure that switching currents in the relay coils do not affect the noise margin of the ...

An RC circuit in series with the coil allows full-current turn-on for reliable relay operation, then reduces the current to save power. Fellow engineer Sanjay R. Chendvankar of Mumbai, India, recently ...

This chapter covers representative general-purpose relays used in the control circuits of most industrial, commercial, and consumer products. Relay names and terminology are in accordance with ...

When we think of relays, we tend to think of those big mechanical things that make a satisfying ‘click’ when activated. As nice as they are for relay-based computers, there are times when you don’t ...

This 12V solar charge regulator meets most small-scale application requirements. With a current rating of 6A, it can handle up to a 100W solar panel. Its principle of operation is very simple and ...

Relays and contactors use a variety of technologies to switch signals and power connections. Many devices called relays use similar techniques and topologies, but the terminology can be confusing.

As an electric motor’s rotor turns in close proximity to the motor windings, a bucking voltage or back electromotive force (EMF) is generated. The back EMF (BEMF) generated across the start winding is ...

In Part 1 of this two-part series, we presented a 3-phase, 480VAC motor circuit with its associated controls (Figure). We stepped through a logical, systematic approach to troubleshoot the main power ...

Circuits that fall under the requirements of Art. 725 are remote-control, signaling, and power-limited circuits that aren’t an integral part of a device or appliance. Article 725 includes circuits for ...